BIM Grade
BIM model check · Revit add-in and browser demo

Check the BIM model where it lives – in Revit, on your computer.

BIM Grade checks the open Revit model against what your client requires and shows every failing element in the model. Today the requirements come as an IDS file; national building rules follow country by country. No IFC export, no upload.

  • IDS check: the model stays on your computerIDS checks run locally: the model, its geometry and its values are not uploaded, and the IDS file stays with you.
  • Inside Revit, without IFC exportChecks the live model, read-only, and takes you to each failing element with Show in model.
  • Same results as ifctester782 of 782 specifications give the same result as ifctester, the open reference; the 334 buildingSMART IDS test cases are part of our tests.

What clients require – it differs by country

United Kingdom
Information management to ISO 19650 under the UK BIM Framework: the client’s Exchange Information Requirements (EIR) and Uniclass classification. IDS files are not common in client requirements yet.
Finland
Since 1 January 2026 a building permit can be applied for with an IFC 4.3 model under the Building Act 751/2023; projects follow the common BIM requirements YTV 2012. Some municipalities check permit models with IDS rules – pilots, not a national requirement.
Other countries
The table below shows, per country, what clients name in their requirements, whether IDS is used there, and the target date of our national rules package.

What BIM Grade checks

  • Available

    Any IDS file your client gives you – in Revit or in the browser demo, every failing element shown in the model.

  • In development

    National building rules, country by country, each finding with the clause it is based on – target dates in the table.

  • Planned

    Building rules for the United Kingdom and Finland.

See the check in Revit

BIM Grade in Revit: IDS check of a model, every failing element with a Show in model button
Shown: the IDS check on a sample model, English subtitles in the picture. National building rules are not in the video yet. Plays only when you press play, no sound.
Text version of the video
  1. Does your model meet the IDS requirements? — Check it before you hand it over: in the browser or right in Revit.
  2. Try it in the browser: open a sample model or your own IFC.
  3. The file opens on your computer. Nothing is uploaded.
  4. Check it against IDS requirements. Here: the sample set.
  5. 82 failures on 81 elements in 3 of 8 specifications, shown in red.
  6. Each failure says what was found: “a classification of any system: not set — none found”.
  7. Click an element: you see it in 3D, with its properties and the requirements it fails.
  8. Cut the model at a storey to look inside.
  9. Take the results with you: HTML report, CSV table or BCF issues.
  10. Same model, same IDS file, now in Revit.
  11. Same requirement, same 60 elements.
  12. Click a finding: the elements are selected.
  13. Show in model: Revit zooms to the element.
  14. Read only: the model is not changed.
  15. Larger models too: a Nordic timber housing model, 11.5 MB, checked in the browser.
  16. “FireRating: not set — the property set has no such property”: what is missing, and where.
  17. How BIM Grade differs
  18. On screen, a comparison of BIM Grade with a typical cloud checker and a typical desktop checker. Your model: uploaded to the vendor’s servers (cloud); stays on your computer (desktop); checked on your computer (BIM Grade). Check in Revit without IFC export: no, export, then upload (cloud); no, export IFC and reload after each fix (desktop); yes, reads the open model (BIM Grade). Results back in Revit: as a BCF issue file (cloud); in a separate program (desktop); in the Revit pane, with Show in model (BIM Grade). Compared with typical tools on the market, November 2026.
  19. Try it now, in your browser bimgrade.com/demo — BIM Grade for Revit: bimgrade.com/se

Checking the model is a build step

Like tests before a software release: the model is checked before every handover, the same way each time.

  1. Open the model. In Revit with the BIM Grade add-in, or as an IFC file in the browser demo.
  2. Load the requirements. An IDS file from your client – the open buildingSMART format. If the requirements exist only as a PDF or a spreadsheet, they have to be written as IDS first.
  3. See what fails and why. Every failing element with the requirement and the value found in the model.
  4. Fix and share. Show in model, section by storey, export to HTML, CSV or BCF for the team.

Why you can rely on the result

  • In development

    No “ready” while a mandatory item is unchecked. The report says what was not checked and why, and does not call the model ready until every mandatory item has been checked.

  • Available

    Every finding leads to its element. Show in model selects the element in Revit and brings it into view.

  • In development

    Rules as they stood on the submission date. Re-run a past check against the rules in force on the day the documents were submitted.

  • Available

    Tested on the standard. Every change of the engine runs the 334 official buildingSMART IDS test cases, with ifctester as an independent judge.

Patent pending: 3 U.S. provisional applications filed on 19 July 2026.

The check runs on your computer. Only the signed norms package comes from the server.

Availablein the current version and covered by testsIn developmentplanned, not sold yet

  • Available

    IDS check in Revit, on your computer. The model, its geometry and its property values are not uploaded, and the IDS file stays with you.

  • Available

    Read-only. The add-in never writes to the model: no transactions, nothing to undo in the project file.

  • Available

    Rule checks on your computer too. The add-in’s own engine checks the model against a signed rules package. Without a licence it uses the open rule set built into the add-in: model quality and MEP networks.

  • Available

    Norms arrive as a signed, encrypted package. Only the package request and the public half of the licence key leave the computer – nothing from the model.

  • Available

    Web check only if you tick it. A checkbox in the add-in sends an anonymised list to the BIM Grade web app instead: codes and numbers per element, no geometry, no names, no free text. It is off by default.

  • In development

    National norms packages, renewed when the rules change, and every finding quotes the clause it is based on. Sold with a licence once a country’s package has passed our acceptance – see the table.

Platforms

What runs today and what is still being built. We mark the status honestly.

  • Available

    Revit Add-in: IDS check of the open model, Show in model, read-only.

  • In development

    Revit National norms in the add-in: in development, dates in the table of countries.

  • In development

    Archicad Add-in for Archicad: in development, not released yet.

  • Available

    IFC Browser demo: open an IFC file and check it against IDS on your computer.

  • Planned

    Tekla, Allplan, Vectorworks, BricsCAD BIM Planned. Tell us below which tool you need, and we will invite you to the beta.

Download the Revit add-in (beta)

Where we launch

BIM Grade is in open beta in 13 countries from 19 November 2026. No country has passed our “Verified” acceptance yet, so findings are marked “check yourself”. Card payment is not open yet: the beta and the browser demo are free.

  • SwedenBeta

    Included: IDS check in Revit and in the browser; national rules in the Revit add-in: BFS 2024:12, BFS 2024:9, BFS 2024:7 and 6 more

  • United KingdomBeta

    Included: IDS check in Revit and in the browser; national rules in the browser demo: Approved Document M Volume 1, Approved Document M Volume 2, Approved Document K and 5 more

    Not yet: national rules in the Revit add-in; prices in local currency (EUR for now)

  • United StatesBeta

    Included: IDS check in Revit and in the browser

    Not yet: national rules in the add-in and the demo (written, not released yet); IBC, IFC and NFPA (paid texts, not covered); prices in local currency (EUR for now)

  • GermanyBeta

    Included: IDS check in Revit and in the browser; national rules in the browser demo: BauO NRW 2018, MBO, GEG and 12 more

    Not yet: national rules in the Revit add-in; states other than North Rhine-Westphalia; paid DIN standards

  • NetherlandsBeta

    Included: IDS check in Revit and in the browser; national rules in the browser demo: Bbl, Arbobesluit

    Not yet: national rules in the Revit add-in

  • AustriaBeta

    Included: IDS check in Revit and in the browser; national rules in the browser demo: OIB-Richtlinie 4, OIB-Richtlinie 2, OIB-Richtlinie 3 and 1 more

    Not yet: national rules in the Revit add-in; provinces other than Vienna

  • CzechiaBeta

    Included: IDS check in Revit and in the browser; national rules in the browser demo: 146/2024 Sb., 23/2008 Sb., 264/2020 Sb. and 1 more

    Not yet: national rules in the Revit add-in

  • SlovakiaBeta

    Included: IDS check in Revit and in the browser; national rules in the browser demo: Vyhláška č. 532/2002 Z. z., Vyhláška č. 94/2004 Z. z., Zákon č. 555/2005 Z. z. and 2 more

    Not yet: national rules in the Revit add-in; the new implementing decrees (vyhlášky)

  • FranceBeta

    Included: IDS check in Revit and in the browser; national rules in the browser demo: Arrêté du 20 avril 2017, Arrêté du 24 décembre 2015, Arrêté du 31 janvier 1986 and 7 more

    Not yet: national rules in the Revit add-in

  • ItalyBeta

    Included: IDS check in Revit and in the browser; national rules in the browser demo: DM 236/1989, DM 5 luglio 1975, DM 3 agosto 2015 and 2 more

    Not yet: national rules in the Revit add-in

  • FinlandBeta

    Included: IDS check in Revit and in the browser; national rules in the browser demo: Rakentamislaki 751/2023, VNa 241/2017, YMa 848/2017 and 5 more

    Not yet: national rules in the Revit add-in

  • NorwayBeta

    Included: IDS check in Revit and in the browser

    Not yet: national rules in the add-in and the demo (written, not released yet); add-in panel in the local language (English for now)

  • DenmarkBeta

    Included: IDS check in Revit and in the browser

    Not yet: national rules in the add-in and the demo (written, not released yet); add-in panel in the local language (English for now)

Status on 19 November 2026.

Countries and norms

The IDS check works with any IDS file, in any country. Whether clients actually use IDS differs: the table shows what clients require in each country, how common IDS is there, and when our national rules package is expected.

CountryWhat clients requireIDS filesNational building rulesDocuments loadedTarget dateBrowser demo
Sweden
BIP CoClass SFV Stockholms stad
Availablewe check any IDS filein this country: pilots
In development
BFS 2024:12 BFS 2024:9 BFS 2024:7 BFS 2024:8 BFS 2024:6 BFS 2024:10 BFS 2024:11 BFS 2024:13 BFS 2026:9
Q1 2027
Germany
AIA / BAP LOIN Masterplan BIM
Availablewe check any IDS filein this country: pilots
In developmentpilot region: Nordrhein-Westfalen
BauO NRW 2018 MBO GEG BauPrüfVO NRW FeuVO NRW ASR A1.2 ASR A1.8 ASR A2.3 ASR A1.3 ASR A2.2 ASR A3.4 ASR A4.1 ASR A4.2 ASR V3a.2 StellplatzVO NRW
Q2 2027
Austria
ÖNORM A 6241-2 AIA / BAP
Availablewe check any IDS filein this country: pilots
In developmentpilot region: Wien
OIB-Richtlinie 4 OIB-Richtlinie 2 OIB-Richtlinie 3 WBTV 2023
Q2 2027
Czechia
DSS Koncepce BIM
Availablewe check any IDS filein this country: announced, not yet issued
In development
146/2024 Sb. 23/2008 Sb. 264/2020 Sb. 101/2005 Sb.
Q2 2027
Slovakia
STN EN ISO 19650
Availablewe check any IDS filein this country: not common
In development
Vyhláška č. 532/2002 Z. z. Vyhláška č. 94/2004 Z. z. Zákon č. 555/2005 Z. z. Vyhláška č. 259/2008 Z. z. Nariadenie vlády č. 391/2006 Z. z.
Q2 2027after the new implementing decrees (vyhlášky)
France
Convention BIM ISO 19650
Availablewe check any IDS filein this country: not common
In development
Arrêté du 20 avril 2017 Arrêté du 24 décembre 2015 Arrêté du 31 janvier 1986 Arrêté du 25 juin 1980 Arrêté du 4 août 2021 Code de la construction et de l'habitation Arrêté du 8 décembre 2014 Arrêté du 27 juin 1994 Code du travail Arrêté du 5 août 1992
Q2 2027
Italy
Capitolato informativo UNI 11337
Availablewe check any IDS filein this country: not common
In development
DM 236/1989 DM 5 luglio 1975 DM 3 agosto 2015 DPR 503/1996 D.Lgs. 81/2008
Q2 2027
Netherlands
BIM basis ILS NL-SfB
Availablewe check any IDS filein this country: in use
In development
Bbl Arbobesluit
Q2 2027
United Kingdom
ISO 19650 EIR Uniclass
Availablewe check any IDS filein this country: not common
In development
Approved Document M Volume 1 Approved Document M Volume 2 Approved Document K Approved Document B Volume 1 Approved Document B Volume 2 Approved Document T NDSS SI 2010/2214
H2 2027
Finland
YTV 2012 Rava3.5 IFC 4.3
Availablewe check any IDS filein this country: pilots
In development
Rakentamislaki 751/2023 VNa 241/2017 YMa 848/2017 YMa 1007/2017 YMa 631/2024 YMa 1010/2017 YMa 796/2017 YMa 1009/2017
H2 2027
United States
NBIMS-US GSA BIM Guides
Availablewe check any IDS filein this country: not yet assessed
In development
2010 ADA Standards 29 CFR 1910 Subpart D 29 CFR 1910 Subpart E
date to be announced
Norway
Statsbygg SIMBA
Availablewe check any IDS filein this country: not yet assessed
In development
TEK17
date to be announced
Denmark
IKT-bekendtgørelsen BIM7AA
Availablewe check any IDS filein this country: not yet assessed
In development
BR18 kapitel 2 BR18 kapitel 3 BR18 kapitel 5 BR18 kapitel 9 BR18 kapitel 10 BR18 kapitel 11 BR18 kapitel 13 BR18 kapitel 14 BR18 kapitel 17 BR18 kapitel 18 BR18 kapitel 19 BR18 kapitel 20 BR18 kapitel 22
date to be announced

“In development”: the documents are loaded and the rules run on open models, but the results have not yet passed our acceptance: an audit on real project models, all relevant clauses covered and every deterministic check found. Until then findings are marked “check yourself”. “Verified” appears only after that audit. Target dates are our current estimate, not a commitment.

Data: BIM Grade market roadmap, updated 2026-11-19.

What you get – and what you don’t

You getYou don’t get
Every failing element with the requirement and the value foundA building permit or a certificate – that stays with your responsible engineer
Show in model, sections, HTML, CSV and BCF exportA finished verdict: the tool points, people decide
Rules of your country as soon as they are verifiedAnswers against norms that are not yet in the system

Pricing

Prices excluding VAT. Card payment opens when the first national norms package has passed acceptance; until then, request access and we will get back to you.

Free

€0Key by work email.

  • AvailableIDS check with your own files, in Revit and in the browser
  • AvailableShow in model for every failing element
  • AvailableExport to HTML, CSV and BCF
  • AvailableOpen rule set for model quality and MEP networks, in Revit and in the browser demo
Get a free key

Licence

€72 / monthPer user, billed yearly (€864 / year). Monthly: €90 / month.

  • AvailableEverything in Free
  • In developmentNational norms package of your country (see the table)
  • In developmentUpdated norms packages for the whole licence period
Request access

Team

€63 / seat / monthFrom 5 seats, billed yearly. From 10 seats: €54 / seat / month.

  • AvailableEverything in Licence, several users on one invoice
  • In developmentShared library of IDS files and check plans
Request access

On-premises

from €10,900 / yearUp to 20 users, plus €2,700 setup. For firms and clients without internet in the project network.

  • In developmentNorms packages delivered as a file, nothing leaves the network
Request a quote

Early access

€36 / monthPer user per month, billed yearly. Price locked for 12 months, for the first 20 firms.

  • AvailableLicence at half price while the norms package is being verified
Join early access

Early access

Write from your work email and we will look at your first model together.

Email [email protected]

Join the beta test

Beta builds, early access to new norm packages and updates are on our beta site. Sign up there with any email address.

Want to join the beta? Go to beta.bimgrade.com